BTMNW - CRYSTAL CLEAR, 1301-6

  • MSDS: BTMNW
  • Manufacturer: SPRAYON PRODUCTS
  • Product Name: CRYSTAL CLEAR, 1301-6
  • National Stock Number: 8010-00N046050
Product Identification

Product ID:CRYSTAL CLEAR, 1301-6
MSDS Date:08/17/1990
FSC:8010
NIIN:00N046050
MSDS Number: BTMNW

Responsible Party
SPRAYON PRODUCTS
26300 FARGO AVENUE
REDFORD HTS, OH 44146
US

Emergency Phone: 216-292-7400

Info Phone: 216-292-7400

Cage: 09800

Contractor
SHERWIN-WILLIAMS DIVERSIFIED BRANDS, INC.
BEDFORD HEIGHTS, OH 44146 US

Telephone: 216-292-7400 OR 216-595-8634

Cage: 09800

Ingredients

1.4%

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


1.1%

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 15%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


1.2%

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: <5%

OSHA PEL 100 PPM;125 STEL

ACGIH TLV: 100 PPM;125 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


LACOLENE 1.1%

CAS: 64742-89-8

Fraction By Weight: 15%

OSHA PEL 500 PPM (MFR)

ACGIH TLV: 500 PPM (MFR)


SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (HI SOL). LEL

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: < 5%

OSHA PEL N/K

ACGIH TLV: 100 PPM


2.6%

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 10%

OSHA PEL 750 PPM;1000 STEL

ACGIH TLV: 750 PPM;1000 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


1.8%

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 15%

OSHA PEL N/K

ACGIH TLV: N/K


2.3%.

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 15%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IN A CONFINED AREA VAPORS IN
HIGH CONCENTRATION ARE ANESTHETIC. IRRITANT TO SKIN AND UPPER
RESPIRATORY SYSTEM. OVEREXPOSURE MAY RESULT IN LIGHT-HEADEDNESS,
STAGGERING GAIT, GIDDINESS & POSSIBLE NAUSEA. CONTAINS PETROLEUM
DISTILLATES. HARMFUL/FATAL IF SWALLOWED. CHRONIC: REPORTS HAVE
ASSOCIATED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: REPEATED AND PROLONGED OVEREXPOSURE
TO SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE, ALSO
KIDNEY AND LIVER DAMAGE. NOTE: TOLUENE APPEARS ON NAVY LIST OF
OCCUP CHEM REPROD HAZS. SE EK CONSULTATION FROM APPROP HLTH
PROFESSIONALS CONCERNING LATEST HAZ LIST INFO & SAFE HANDLING &
EXPOSURE INFO .
Medical Cond Aggravated by Exposure:NONE ESTABLISHED.

First Aid

First Aid:INHAL: REMOVE PATIENT TO FRESH AIR. EYE: FLUSH WITH WATER FOR
AT LEAST 15 MIN. SKIN: WASH WITH SOAP AND WATER. INGEST: CALL
PHYSICIAN IMMEDIATELY. DO NOT INDUCE VOMITING.

Fire Fighting

Flash Point Method:TOC
Flash Point:<20F,<-6.7C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE. WATER MAY BE USED TO
KEEP FIRE EXPOSED CONTAINERS COOL. WEAR NIOSH/MSHA APPROVED SCBA
AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT SPRAY NEAR OPEN FLAME. KEEP AT
ROOM TEMPERATURES AS EXPOSURE TO DIRECT SUNLIGHT OR OTHER HEAT MAY
CAUSE BURSTING.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, VENTILATE
AVOID BREATHING VAPORS AND REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. KEEP AT ROOM
TEMPERATURE AS EXPOSURE TO DIRECT SUNLIGHT OR HEAT MAY CAUSE
BURSTING.
Other Precautions:KEEP AWAY FROM CHILDREN. DO NOT PUNCTURE OR
INCINERATE. DO NOT SPRAY NEAR FIRE OR OPEN FLAME. AVOID BREATHING
VAPOR OR SPRAY MIST. LIMITS FOR NUISANCE DUST: 10 MG/M3 TDUST; 5
RESP.

Exposure Controls

Respiratory Protection:IF PERSONAL EXPOSURE CANNOT BE CONTROLLED BELOW
APPLICABLE LIMITS BY VENTILATION, WEAR NIOSH/MSHA APPRVD PROPERLY
FITTED ORGANIC VAPOR/PARTICULATE RESP FOR PROT AGAINST MATLS IN
INGRED SECTION. WHEN S ANDING/ABRADING DRIED FILM, (SUPP DATA)
Ventilation:PROVIDE LOCAL EXHAUST VENT IN VOL & PATTERN TO KEEP TLV OF
ALL HAZ INGRED IN INGRED SECT BELOW LIMIT, & LEL (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES (SUP DATA)
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
RESP PROT:WEAR NIOSH/MSHA APPROVED DUST/MIST RESPIRATOR FOR DUST WHICH
MAY BE GENERATED FROM THIS PRODUCT, UNDERLYING PAINT, OR THE
ABRASIVE. VENT: IN INGRED SECTION BELOW STATED LIMIT. EYE
PROTECTION : WITH UNPERFORATED SIDESHIELDS .

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:<0F,<-18C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:FASTER THAN ETHER
Appearance and Odor:COATINGS
Percent Volatiles by Volume:93(WT)

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:DO NOT STORE ABOVE 120F.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DO NOT INCINERATE. DISPOSE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS REGARDING POLLUTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.